Features
- Designed with smart controls and variable vapor output to obtain optimal humidity levels for mushroom growth
- Humidity controller is built into the humidifier, allowing you to automate your humidity in your grow without the need for additional equipment
- Next-gen EC ultrasonic vaporizer can reach up to 10 levels of humidity for fine-tuned moisture control
- Built with a specially designed water-resistant seal to prevent leakage and extend operational lifespan
- Features VPD (vapor pressure deficit) and humidity triggers, timers, a hideable backlit display, and auto-start with backup memory for use with other controllers, if needed
- Extendable tubing enables focused moisture distribution to specific areas within your grow space
- Deep, removable reservoir with a convenient top-fill design
- Perfect for small to medium mushroom grows
- T7 Model - Noise: 46 dBA | Wattage: 100 W | Voltage: 100-240V AC | Frequency: 50/60 Hz | Operating Temperature: 41 to 122ºF | Operating Humidity: 30% to 85% RH
- (T3 Model - Noise: 38 dBA | Wattage: 24 W | Voltage: 100-240V AC | Frequency: 50/60 Hz | Operating Temperature: 41 to 122ºF | Operating Humidity: 30% to 85% RH) *on backorder
- See Specifications and Resources for additional specifications
AC Infinity Cloudforge Humidifiers
Your Price:
Give your mushrooms the humidity they need with this convenient all-in-one humidifier! Each unit features a fully programmable, automated humidity controller with built-in sensor and probe so you can dial in your mushroom grow for your best harvest yet. The T7 model is perfect for more spacious grow setups and tents. The T3 model is in backorder until further notice.
Automated Humidity for All Mushroom Grows
A next-gen humidifiers designed with smart controls and targeted vapor delivery to obtain ideal humidity levels for successful mushroom growth. Its body is specially sealed for enhanced water resistance, ensuring no water tank leakage to extend and preserve its long operational lifespan. The integrated controller features onboard humidity and VPD triggering, which utilizes a corded sensor probe for accurate readings, and timer programming. Once activated, the innovative EC ultrasonic vaporizer digitally pulses water to distribute moisture throughout your grow space.
Smart Humidity Control
The environmental humidifier’s onboard controller is equipped with humidity and VPD triggers plus timer programming. The automated humidity trigger allows you to set your desired humidity level and will automatically switch on and off to maintain constant humidity levels in your grow space. Digitally set up to 10 levels of condensation to generate precise levels of humidity for your mushrooms in any stage of their growth cycle.
This unit can be connected to other controllers in the AC Infinity line utilizing UIS connectors.
Designed for Growers
This series was designed from the ground up for optimized moisture control in grow-space environments.
(The flexible tubing on the T3 Unit extends to over 4 feet in length and supports targeted vapor distribution, making it possible to direct moisture to specific spots within your grow space.)*on backorder
The T7 includes an elbow nozzle to distribute high-volume moisture to a unidirectional area, as well as a five-way nozzle that evenly directs moisture in all directions for wider coverage.
In addition to the specially designed seal, the body is built with waterproof ports that ensure no leakage into them when connecting UIS controllers. Also features a backlit display that can be toggled off to prevent night cycle disruption, and an automatic shutoff system that turns this humidifier off when its water supply is depleted.
Technical Specifications
| Length Inches | |
|---|---|
| Width Inches | |
| Height Inches | |
| Product Weight | |
| Case Quantity | |
| Case Dimensions (L"xW"xH") | |
| Case Weight lbs |
| Materials | ||
|---|---|---|
| Thickness | ||
| Tensil Strength | ||
| Climate Suitability | ||
| Transmission Rate | ||
| Diffusion Rate | ||
| Custom Size Option | ||
| Bag Weight | ||
| Best Use | ||
| Category | Environmental Control |
For full usage and setup instructions, refer to the manual link on the Resources tab, or the manual included with the unit.
For most mushroom growing applications, set your humidifier between 90-95%. Be sure your output tube points upwards to prevent water dripping from the tube and settling in the bottom of your grow area.
Details
Automated Humidity for All Mushroom Grows
A next-gen humidifiers designed with smart controls and targeted vapor delivery to obtain ideal humidity levels for successful mushroom growth. Its body is specially sealed for enhanced water resistance, ensuring no water tank leakage to extend and preserve its long operational lifespan. The integrated controller features onboard humidity and VPD triggering, which utilizes a corded sensor probe for accurate readings, and timer programming. Once activated, the innovative EC ultrasonic vaporizer digitally pulses water to distribute moisture throughout your grow space.
Smart Humidity Control
The environmental humidifier’s onboard controller is equipped with humidity and VPD triggers plus timer programming. The automated humidity trigger allows you to set your desired humidity level and will automatically switch on and off to maintain constant humidity levels in your grow space. Digitally set up to 10 levels of condensation to generate precise levels of humidity for your mushrooms in any stage of their growth cycle.
This unit can be connected to other controllers in the AC Infinity line utilizing UIS connectors.
Designed for Growers
This series was designed from the ground up for optimized moisture control in grow-space environments.
(The flexible tubing on the T3 Unit extends to over 4 feet in length and supports targeted vapor distribution, making it possible to direct moisture to specific spots within your grow space.)*on backorder
The T7 includes an elbow nozzle to distribute high-volume moisture to a unidirectional area, as well as a five-way nozzle that evenly directs moisture in all directions for wider coverage.
In addition to the specially designed seal, the body is built with waterproof ports that ensure no leakage into them when connecting UIS controllers. Also features a backlit display that can be toggled off to prevent night cycle disruption, and an automatic shutoff system that turns this humidifier off when its water supply is depleted.
Usage
For full usage and setup instructions, refer to the manual link on the Resources tab, or the manual included with the unit.
For most mushroom growing applications, set your humidifier between 90-95%. Be sure your output tube points upwards to prevent water dripping from the tube and settling in the bottom of your grow area.
Resources
